Factpages Norwegian petroleum directorate
Factpages Norwegian petroleum directorate
NPD          Norsk
09.06.2023 - 01:35
Time of last synchronization with NPD's internal systems

3/4-2 S

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on NPD guidelines for designation of wells and wellbores.
    3/4-2 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the NPD.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the NPD.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Well name
    Official name of the parent well for the wellbore based on NPD guidelines for designation of wells and wellbores.
    3/4-2
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    dno 0601 R08 xline 1310 & inline 1182
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Det norske oljeselskap ASA
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the NPD.
    1364-L
    Drilling facility
    NPD's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    45
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    18.07.2012
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    31.08.2012
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    10.08.2013
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    10.08.2013
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    45.5
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    51.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2961.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2864.6
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    28.6
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    104
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    FARSUND FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    56° 38' 47.24'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    4° 5' 38.18'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6278707.02
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    567085.05
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    NPD's unique id for the wellbore.
    6622
  • Wellbore history

    General
    Well 3/4-2 S was drilled on the Ulvetanna prospect in the Søgne Basin in the southern North Sea. The prospect was a salt-induced closure at Late Cretaceous level. The objective of exploration well 3/4-2 S Ulvetanna was to test the hydrocarbon potential of the Paleocene Ekofisk Formation and Cretaceous Tor and Hod Formations, in addition to investigate the maturity level of the potential Mandal Formation source rock.
    Operations and results
    Wildcat well 3/4-2 S was spudded with the jack-up installation Mærsk Guardian on 18 July 2012 and drilled to TD at 2916 m (2864 m TVD) in the Late Jurassic Farsund Formation. The well was drilled deviated in order to penetrate the steeply dipping potential reservoir levels in a best possible angle and direction. The well was drilled with spud mud down to 1262 m and with Performadril WBM from 1262 m to 2962 m.
    The Shetland Group Ekofisk Formation was penetrated at 2638 m (2559 m TVD), the primary reservoir level Tor Formation was observed at 2700 m (2614 m TVD), while the potential secondary target Hod Formation was found at 2769 m (2677 m TVD). Both targets were found to be water bearing. Top Mandal Formation was encountered at 2911 m (2815 m TVD). It was 9 m thick with very high gamma ray. Geochemical analyses of sidewall cores indicated a very good oil-prone source rock (TOC = 5 - 7 %wt; Hydrogen Index = 540 to 600 mg HC/g TOC). Tmax and vitrinite reflectance analyses show that the Mandal Formation has not yet entered the oil window in the well location. The well also penetrated a section of the underlying Farsund Formation (base not seen). Side wall cores indicated oil-prone quality here as well, but not as good as in the Mandal Formation.
    No cores were cut and no wire line fluid samples were taken.
    The well was permanently abandoned on 31 August 2012 as a dry well.
    Testing
    No drill stem test was performed.
  • Cuttings at the NPD

    Cuttings at the NPD
    Cuttings available for sampling?
    YES
    Cuttings at the NPD
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    180.00
    2961.00
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    MWD LWD - QBAT PWD DGREWR-
    2618
    2961
    MWD LWD - ABG GR EWR PWD BAT
    1259
    2618
    MWD LWD - ALD CTN ADR AFR
    2618
    2961
    MWD LWD - DIR PWD
    193
    1262
    MWD LWD - QBAT PWD DGR EWR DIR
    193
    1262
    RSCT GR
    2911
    2956
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    178.0
    36
    178.0
    0.00
    LOT
    SURF.COND.
    13 3/8
    1251.0
    17 1/2
    1262.0
    1.87
    LOT
    PILOT HOLE
    1262.0
    12 1/4
    1262.0
    0.00
    LOT
    INTERM.
    9 5/8
    2613.0
    12 1/4
    2618.0
    0.00
    LOT
    OPEN HOLE
    2961.0
    8 1/2
    2961.0
    0.00
    LOT
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    218
    1.05
    14.0
    spud mud
    798
    1.05
    4.0
    spud mud
    1240
    1.09
    4.0
    spud mud
    1260
    1.19
    14.0
    WBM
    1262
    1.19
    14.0
    Displacement mud
    1262
    1.09
    4.0
    spud mud
    1287
    1.41
    25.0
    ENVIROMUL
    1686
    1.54
    23.0
    OBM
    1922
    1.61
    63.0
    Performdril WBM
    2618
    1.62
    28.0
    OBM
    2918
    1.61
    56.0
    Performadril WBM
    2961
    1.61
    63.0
    Performadril WBM