Factpages Norwegian petroleum directorate
Factpages Norwegian petroleum directorate
NPD          Norsk
07.06.2023 - 01:35
Time of last synchronization with NPD's internal systems

7016/2-1

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on NPD guidelines for designation of wells and wellbores.
    7016/2-1
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the NPD.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the NPD.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    BARENTS SEA
    Well name
    Official name of the parent well for the wellbore based on NPD guidelines for designation of wells and wellbores.
    7016/2-1
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    Survey MCD 3D troms 111 inline 1408 & trace 3478
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Eni Norge AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the NPD.
    1465-L
    Drilling facility
    NPD's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    113
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    14.07.2013
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    03.11.2013
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    01.10.2015
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    01.10.2015
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    34.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    1366.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4061.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    4060.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    9.1
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE PALEOCENE
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    SOTBAKKEN GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    70° 50' 48.93'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    16° 33' 33.23'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7861269.63
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    557093.48
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    33
    NPDID wellbore
    NPD's unique id for the wellbore.
    7232
  • Wellbore history

    General
    Well 7016/2-1 was drilled on the Bønna prospect in the Harstad Basin in the remote south-west part of the Barents Sea. The objective of the well was to prove petroleum in Eocene and Paleocene reservoir rocks belonging to the Sotbakken Group.
    Operations and results
    Between 3 August and 6 August 2012 a 9 7/8" pilot hole 7016/2-U-1 was drilled from the seabed to 1984 m using the semi-submersible installation Scarabeo 8. The pilot was drilled 50 m away from the planned location of the main well. It was logged with MWD gamma ray, resistivity and sonic logging tools together with visual and sonar observation of the seabed by an ROV. There was no indication of shallow gas.
    The year after, on 14 July 2013, Scarabeo 8 returned to the location and spudded wildcat well 7016/2-1. Due to wellbore stability issues, the well was sidetracked on 31 August 2013 at 2396 m after reaching the 12 1/4" section TD at 3035 m. The sidetrack was drilled to TD at 4061 m in Late Paleocene sediments in the Sotbakken Group, Torsk Formation.
    The well was drilled with seawater and hi-vis sweeps down to 1973 m, with Glydril mud from 1973 m to 2376 m, and with FormPro/brine mud from 2376 m to 2396 m (TD) in the primary well. The sidetrack well was drilled with Glydril mud from kick-off to final TD.
    No Sandstone reservoirs were encountered and no significant gas shows above background gas were recorded. Only minor gas shows were observed over depth ranges 2730 - 2745 m, 2760 - 2772 m and 3400 - 3408 m, probably corresponding to more drillable and porous zones. Eni Norge wellsite geologists examined cuttings for the presence of oil shows. No shows were observed.
    No conventional or sidewall cores were taken. No wireline pressure points or fluid samples were taken.
    The well was permanently abandoned on 3 November 2013 as a dry well.
    Testing
    No drill stem test was performed.
  • Cuttings at the NPD

    Cuttings at the NPD
    Cuttings available for sampling?
    YES
    Cuttings at the NPD
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1980.00
    3035.00
  • Lithostratigraphy

    Lithostratigraphy
    Top depth [m]
    Lithostrat. unit
    1400
    1400
    3091
    3091
  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    GR RES DIR SON
    1435
    2370
    GR RES DIR SON
    3176
    3324
    GR RES ECD DIR DEN NEU
    3070
    4057
    RAB NBGR GR RES ECD
    2292
    3101
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    36
    1460.0
    42
    1460.0
    1.23
    LOT
    SURF.COND.
    20
    1968.0
    24
    1973.0
    1.42
    LOT
    LINER
    16
    2370.0
    17 1/2
    2376.0
    1.54
    FIT
    INTERM.
    13 3/8
    2782.0
    14 3/4
    2782.0
    0.00
    INTERM.
    9 5/8
    3102.0
    12 1/4
    3102.0
    0.00
    OPEN HOLE
    4061.0
    8 1/2
    4061.0
    0.00
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    1430
    0.00
    23000.0
    GL
    1973
    0.00
    1000.0
    GE
    2795
    0.00
    16000.0
    KF
    2845
    0.00
    24000.0
    GL
    3280
    0.00
    21000.0
    GL
    4061
    0.00
    21000.0
    GL