Factpages Norwegian petroleum directorate
Factpages Norwegian petroleum directorate
NPD          Norsk
05.06.2023 - 01:35
Time of last synchronization with NPD's internal systems

6507/8-10 S

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on NPD guidelines for designation of wells and wellbores.
    6507/8-10 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the NPD.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the NPD.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Well name
    Official name of the parent well for the wellbore based on NPD guidelines for designation of wells and wellbores.
    6507/8-10
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    MC3D PGS HVG2011 inline 3652. xline 3208
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Neptune Energy Norge AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the NPD.
    1808-L
    Drilling facility
    NPD's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    34
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    21.03.2020
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    23.04.2020
    Plugged and abondon date
    Date when the P&A-operations of the wellbore was finished, as reported by the operator to the NPD throught DDRS (Daily Drilling Reporting System). Only applied once pr. wellhead/surface location.
    23.04.2020
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    24.02.2021
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    30.04.2021
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    38.6
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    324.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2399.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2350.0
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    ÅRE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    65° 18' 10.4'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    7° 31' 13.39'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7243202.73
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    431018.86
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    NPD's unique id for the wellbore.
    8991
  • Wellbore history

    General
    Well 6507/8-10 S was drilled to test the Grind prospect east of the Heidrun Field in the Grinda Graben in the Norwegian Sea. The primary objective was to prove presence and commercial volumes of movable hydrocarbons in the Early Jurassic sandstones of the Tilje and Åre formations.
    Operations and results
    A 9-7/8" pilot hole 6507/8-U-3 was drilled to 1150 m in parallel to drilling 6507/8-10 S 36" x 42"-hole, 12 m north-west of the main bore location.  Dual drilling was a first for the West Phoenix. No shallow gas or shallow water flows were observed during drilling.
    Wildcat well 6507/8-10 S was spudded with the semi-submersible installation West Phoenix on 21 March 2020 and drilled to TD at 2399 m (2350 m TVD) in the Early Jurassic Åre Formation. Due to adverse weather nine days were spent as WOW, otherwise operations proceeded without significant problems. The well was drilled with seawater and hi-vis pills down to 1150 m and with Versatec oil-based mud from 1150 m to TD.
    The Tilje Formation was encountered at 2053.0 m and comprised 150 m sandstone with minor siltstones and claystones. The Åre Formation consisted of 197m sandstone with minor siltstones and coal and was encountered at 2203.0 m. Petrophysical analysis indicated good reservoir properties (24-25% porosity) in both formations with 98 m net reservoir sand in Tilje and 98 m net reservoir sand in Åre. Both formations were dry. “Dead oil” was observed in a very few cutting samples, but it has been interpreted to be associated with coal layers in the Åre Formation.
    No cores were cut. No logs were run on wire line and no fluid sample was taken.
    The well was permanently abandoned on 23 April 2020 as a dry well.
    Testing
    No drill stem test was performed.
  • Cuttings at the NPD

    Cuttings at the NPD
    Cuttings available for sampling?
    YES
    Cuttings at the NPD
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1160.00
    2399.00
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    LWD - DIR
    362
    440
    LWD - DIR GR RES PWD
    440
    1150
    LWD - GR RES PWD CAL NEU DEN SON
    1956
    1299
    LWD - GR RES PWD DIR SON DEN NEU
    1150
    1956
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    437.0
    36
    440.0
    0.00
    SURF.COND.
    13 3/8
    1145.0
    17 1/2
    1150.0
    1.82
    LOT
    LINER
    9 5/8
    1950.0
    12 1/4
    1956.0
    1.87
    LOT
    OPEN HOLE
    2399.0
    8 1/2
    0.0
    0.00